Disclaimer: fishinggearx.com is supported by its audience. When you purchase through links on our site, we may earn a small commission at no extra cost to you.
The striker series is an extensive line of fish finders from Garmin. One of the newer models in the series is the Garmin Striker Plus 5cv, which comes with a few extra features compared to the other older models. It’s a relatively inexpensive fish finder and it comes with features that will allow you to get the most out of its sonar and built-in GPS. In the Garmin Striker Plus 5cv review below, we’ll go over each feature of this fish finder in more detail.
Garmin Striker Plus 5cv Features
Display and Control
The Garmin Striker Plus 5cv is designed for easy and convenient use. Measuring 5 inches in diagonal, the display provides a wide view of all the sonar feedback. It’s an easy to read display, even from a distance.
With this size, it also allows viewing up to three panels simultaneously. When you choose the split screen mode, you could have two types of sonar feedback side-by-side. Additionally, you could have the navigation data as the third panel.
Moreover, the display delivers high quality images as it features WVGA color and high resolution with 800 x 480 pixel matrix. These features provide very sharp images, so you can easily identify different details on the sonar images.
For improved readability, the display is also equipped with LED backlighting. This provides bright images, which are readable even in direct sunlight. The backlighting is also adjustable, so you can set the brightness to a level that would work best in different light conditions.
The fish finder uses keypad control with buttons located on the right side of the screen. Using the keypad, you can easily navigate through the menus and settings of the unit. It features a highly intuitive interface, so it’s easy to understand and get into all the settings.
When using this fish finder, you also won’t have to worry about water damage. It comes with an IPX7 waterproof rating, which means that all the internal components and connectors of the display are sealed tight. It also means that the unit can display rain and splashes without getting any damage.
One of the disadvantages of this display is that there’s no micro SD card slot. Due to this, its storage capacity is limited and the system is not compatible with any charts.
The Garmin Striker Plus 5cv comes with the CV20-TM transducer. It supports some of Garmin’s most advanced sonar technologies, which are CHIRP and ClearVu. The combination of these two sonars allows you to get a clear view of what passes below your boat. When viewing the sonar images, you’ll be able to clearly see fish, structure and submerged objects.
The transducer uses two base frequencies for CHIRP and ClearVu. For CHIRP sonar, they are 77kHz and 200kHz, with the capability of modulating the pulse in the mid-band and high-band range. With an optional transducer, the device is also 50/200kHz capable, but it’s sold separately. For ClearVu sonar, the frequencies are 455kHz and 800kHz.
Garmin’s ClearVu is a high-frequency sonar that uses a concentrated sonar signal to scan a designated area. This provides high-resolution imagery with amazing detail of what’s happening below the boat. It makes it easier to separate targets and identify the best locations for your fishing efforts.
When it comes to the sonar’s depth capability, it can reach up to 2,300 feet in freshwater and 1,100 feet in saltwater. However, this is its capability when using CHIRP sonar. Its ClearVu sonar’s depth capability is 250 feet.
Another advantage of this fish finder is also that it is suitable for both transom and trolling motor mounting options. It comes with hardware for both installation choices.
Other sonar features:
- Fish Symbol ID, which displays fish icons for easier identifying of targets.
- Bottom Lock that allows you to zoom into the bottom of the sonar image.
- Split Screen Zoom, which provides a magnified view of a certain portion of the sonar readings.
- Ultrascroll feature that selects a scroll rate that would match your boat’s speed .
- Autogain that minimizes clutter on the screen, helping to focus on bigger targets.
- A-Scope, which is a flasher mode that offers real-time display of fish passing through the beam.
- Adjustable Depth Line, which allows to adjust the line that measures the depth of underwater objects.
- A temperature sensor that measures water temperature at the level of the transducer.
The Garmin Striker Plus 5cv also provides basic navigation, though it doesn’t have any chartplotting capability. Instead, it lets you track your boat’s position on a blank screen. However, on this blank screen, you can save waypoints, create routes and record tracks. This function can be handy for saving your favorite fishing spots, boat ramps and other useful points of interest.
Moreover, while the system can’t be upgraded with any charts, it does allow you to create your own. It offers Quickdraw Contours map drawing software, which automatically creates maps as you’re trolling the waters. The system uses combined data from the GPS and sonar in order to draw maps with 1’ contours and depth labels. And the unit can store up to 2 million acres of these maps.
Garmin Striker Plus 5cv Pros and Cons
The Garmin Striker Plus 5cv has a lot to offer for a reasonable price. It provides powerful sonar and structure scanning ClearVu sonar. This fish finder would make a great choice for those that are looking for good sonar performance but don’t need advanced navigation capability. However, the unit does come with the Quickdraw Contours function, which can help in creating maps of your own.